PMI record keeping, without the filing cabinet.

Plan every safety inspection, record what was found and what was done, and keep it against the vehicle. FleetInspect schedules PMIs, MOTs and calibrations for each vehicle and trailer, and holds the inspection, the defects and the repairs in one place.

The problems we built this for

01

The planner on the wall

A wall chart is right on the day it is drawn. In FleetInspect each vehicle and trailer has its own interval, the inspections are planned up to two years ahead, and the calendar shows the month or the week for one vehicle or the whole fleet.

02

Inspections that slip a week

A notice goes to your maintenance group before each inspection falls due, seven days ahead unless you set otherwise, and an overdue one is chased every day until it is done.

03

Sheets in three places

Some in the office, some at the garage, some in an inbox. The inspection job holds the checklist, the odometer reading, the parts and costs and the garage's own sheet as an attachment.

04

Defects found, repair unrecorded

A failed question on the inspection raises a defect job against the vehicle, so what was found and what was done about it are linked, not filed separately.

From the planner to the record, in four steps

Step 1

Set the interval

In days, weeks, months or years, or by a miles or hours reading. Set it for every asset, a category, a depot or one vehicle: the most specific setting wins.

Step 2

Reminders go out

Due and overdue notices go to the maintenance group for that vehicle, which can include an outside email address such as your garage. The dashboard shows services due and overdue.

Step 3

Record the inspection

On the web or in the app: your own sections and questions, with yes or no answers, photos, numbers checked against limits and signatures. Attach the inspection sheet and the invoice.

Step 4

Keep it against the vehicle

Every job stays on the asset with its date, reading, mechanic or supplier, parts and costs. A single job prints as a PDF, and the service history exports as a pack.

Your modules

Take the modules that fit how you work, leave the ones that don't. Every module shares the same data and the same UI.

🗓️

Service Schedule

Safety inspections, services, MOTs, tax and calibrations planned for each asset, with a calendar and reminders.

🔧

Workshop Jobs

Inspection and repair jobs with checklists, parts, purchase orders, time logs and attachments.

✅

Walkaround Checks

Daily checks in the driver app, with defects raised from a failed item.

🛠️

Defect Reporting

Defects followed from the report to the repair, with urgent ones taking the vehicle off the road.

Everything included

  • Inspection intervals per vehicle, category or depot
  • Time, mileage or hours intervals
  • Inspections planned up to two years ahead
  • Month and week calendar, by vehicle or fleet
  • Due and overdue reminders
  • Digital inspection checklist on web and app
  • Numbers checked against limits
  • Defects raised from a failed question
  • Mechanic, supplier, parts and cost on each job
  • Inspection sheets and invoices attached
  • MOT, tax and calibration renewals
  • Tachograph calibration dates kept up to date
  • Tyre records with tread readings
  • Service history pack as a PDF
  • Reports as PDF, Excel or CSV

Every recurring duty on one page

Our printable transport manager's compliance calendar sets out what falls due daily, every 28 and 90 days, yearly and every five years, with a 12 month planner.

Get the calendar

Common
questions.

Straight answers on safety inspection records in FleetInspect.

What is a PMI?

A preventive maintenance inspection, which DVSA's guide calls a safety inspection: a regular check of a vehicle or trailer for roadworthiness. The guide gives a range of 4 to 13 weeks between inspections, depending on the work, and the interval you choose is stated on your operator licence.

How long must PMI records be kept?

At least 15 months, for every vehicle and trailer, including ones you have since sold or taken off the licence. That covers the safety inspection records, the driver defect reports and the repairs. FleetInspect does not delete maintenance records after a set period.

What should a PMI record include?

DVSA's guide lists the operator, the date, who inspected the vehicle and where, the vehicle's identity, make and model, the odometer reading, every item inspected and its condition, the defects found, the repairs and who did them, and a named, signed and dated declaration that the vehicle is roadworthy.

Can PMI records be kept electronically?

Yes. DVSA's guide accepts electronic records in place of paper, provided they hold the same information and can be produced when asked for.

Our garage does the inspections. How do its sheets get in?

Record the garage as the supplier on the inspection job and attach its sheet and invoice to it. The garage's email address can be added to the maintenance group, so it receives the notice when an inspection is coming due. The garage does not complete the job in FleetInspect itself.

Does it record brake tests?

There is no dedicated brake test record. You can add questions to the inspection checklist that take a number and check it against a limit, and attach the brake test printout to the job. FleetInspect does not count laden brake tests for you.

Does it cover MOTs and tachograph calibration?

Yes. MOT, tax and calibration are renewals with an expiry date that becomes the next due date, with the same reminders. Where FleetInspect reads your tachograph files, the next calibration date is kept up to date from them.

What happens to a vehicle that is off the road?

A vehicle or trailer with an open urgent job is treated as off the road. By default it cannot be given a walkaround check or dispatched on a transport job, and the dashboard counts its days off the road.

What does it cost?

It depends on the modules you take and the number of vehicles, so we price it with you rather than publish a number that might not fit. Book a demo and we will give you a written quote for your fleet.

Let’s talk about
your business.

Book a free, no-obligation demo and see how FleetInspect can transform your operations. One email is all it takes.

Email us

The link opens a ready-made email in your mail app. Tell us a little about your business and we’ll come back with demo times.

Prefer to call?
We reply within one working day
Ready when you are

See the platform on
your data.

Book a 30-minute walkthrough. We’ll map FleetInspect onto how your operation actually works. No generic demo, no hard pitch.